項目符號Emailgowyitzou@dragon.ccut.edu.tw
                        johnsontzou@gmail.com
項目符號分機:1200 (教務長室)
項目符號分機:2543
項目符號研究室:I403
 
學歷

 國立中山大學機械工程研究所博士

 國立台灣工業技術學院工程技術研究所機械工程組碩士

 國立台灣工業技術學院機械工程技術系

學術專長

 精密機械與製造、金屬成形與製程控制技術、機台設計與開發、
 模具設計與分析、有限元素模擬與實驗驗證、智慧製造與管理

實務經驗

 和春技術學院 校長(教授) 2015/02/1至2015/07/31

 高苑科技大學 機械與自動化工程系教授 2007/08至2015/01

 朝友工業股份有限公司 教育部業界深耕服務1年 技術研發 2012/08至2013/07

 高苑科技大學 教授兼扣件產業技術研發中心主任 2009/08至2013/03

 高苑科技大學 教授兼扣件產業技術整合碩士學位學程學程主任 2010/02至2012/07

 高苑科技大學 教授兼教務長 2008/09至2012/01

 高苑科技大學 教授兼光機電整合技術研究中心 2007/08至2008/08

 永達技術學院 教授兼校務顧問 2006/08至2007/07

 永達技術學院 教授兼副校長 2004/08至2006/07

 紐西蘭Waikato University材料製程工程系 Visiting Professor 2004/01至2004/07

 永達技術學院 教授兼研究發展處處長 2002/08至2003/07

 澳洲Wollongong University 機械工程系 Principal Research Fellow 2001/08至2002/07

 永達技術學院 教授兼研究發展處處長 2001/03至2001/07

 永達技術學院 副教授兼研究發展處處長 1999/08至2001/02

 永達工商專校 副教授兼實輔室主任 1996/08至1999/07

 耀輝螺絲公司 技術顧問 1995/08至1996/07

 南榮工商專校 講師兼機械科主任 1988/08至1989/07

 易立機械公司 助理工程師 1983/08至1984/07

專業證照

 電腦數值控制銑床工乙級  109-000475 

本學期授課課程  
歷年授課課程

 

研究著作

項目符號期刊論文

  1. Yeong-Maw Hwang and Gow-Yi Tzou*, 1993, "An Analytical Approach to Asymmetrical Cold Strip Rolling Using the Slab Method," ASM Journal of Materials Engineering and Performance, Vol. 2, No. 4, pp. 597-606. SCI, IF=0.981

  2. Gow-Yi Tzou* and Yeong-Maw Hwang, 1994, "Analysis of Asymmetrical Cold Strip Rolling by Force Equilibrium Method," Journal of the Chinese Society of Mechanical Engineering, Vol. 15, No. 1, pp. 11-22.  SCI, IF=0.274

  3. Yeong Maw Hwang and Gow-Yi Tzou*, 1994, "An Analytical Approach to Asymmetrical Hot Strip Rolling by the Slab Method," the Chinese Journal of Mechanics, Vol. 10, No.1, pp. 21-30. SCI, IF=0.454

  4. Yeong-Maw Hwang and Gow-Yi Tzou*, 1995, "An Analytical Approach to Asymmetrical Hot Sheet Rolling Considering the Effect of the Shear Stress and Internal Moment at the Roll Gap," Journal of Materials Processing Technology, Vol. 52, No. 2-4, pp. 399-424. SCI, IF=2.041

  5. Yeong-Maw Hwang and Gow-Yi Tzou*, 1995, "Analysis of Asymmetrical Hot Strip Rolling by the Slab Method," ASM Journal of Materials Engineering and Performance, Vol. 4, No. 3, pp. 265-274. SCI, IF=0.981

  6. Gow-Yi Tzou* and Yeong Maw Hwang, 1995, "Effects of Hybrid Friction on the Characteristics of Asymmetrical Strip Rolling Using an Analytical Approach," Journal of the Chinese Society of Mechanical Engineering, Vol. 16, No. 5, pp. 499-509. SCI,IF=0.274

  7. Yeong-Maw Hwang and Gow-Yi Tzou*, 1996, "Stress Analysis of Asymmetrical Cold Rolling of Clad Sheet Using the Slab Method," ASM Journal of Materials Engineering and Performance, Vol. 5, No. 5, pp. 621-631. SCI, IF=0.981

  8. Yeong-Maw Hwang and Gow-Yi Tzou*, 1996, "An Analytical Approach to Asymmetrical Cold and Hot Rolling of Clad Sheet Using the Slab Method," Journal of Materials Processing Technology, Vol. 62, pp. 249-259. SCI, IF=2.041

  9. Yeong-Maw Hwang and Gow-Yi Tzou*, 1997, "Analytical and Experimental Study on Asymmetrical Sheet Rolling," International Journal of Mechanical Sciences, Vol. 39, No. 3, pp. 289-303. SCI, IF=2.061

  10. Yeong-Maw Hwang, Hung-Hsiou Hsu, and Gow-Yi Tzou, 1998, "A Study of PSW Rolling Using Stream Function," Journal of Materials Processing Technology, Vol. 80-81, pp. 341-344. SCI, IF=2.041

  11. 鄒國益、黃敏郎,1998, ”利用切片法分析平板壓縮問題之研究”,永達工商專學報, 第11期, pp. 1-5。

  12. Gow-Yi Tzou, 1999, "Relationship Between Frictional Coefficient and Frictional Factor on Asymmetrical Sheet Rolling," Journal of Materials Processing Technology, Vol. 86, No. 1-3, pp.271-277. SCI, IF=2.041

  13. 黃敏郎、鄒國益*, 1999, "以切片法探討在混合摩擦下圓盤壓縮成形之研究",永達工商專學報,第12期,pp. 46-54。

  14. Yeong-Maw Hwang, Dyj-Cheng Chen, and Gow-Yi Tzou, 1999, "Study on Asymmetrical Sheet Rolling by the Finite Element Method," The Chinese Journal of Mechanics, Vol. 15, No. 4, pp. 149-155. SCI, IF=0.454

  15. Gow-Yi Tzou* and Ming-Nan Huang, 2000, "Study on the Minimum Thickness of Asymmetrical PV Cold Rolling of Sheet," Journal of Materials Processing Technology, Vol. 105, No. 3, pp. 344-351. SCI, IF=2.041

  16. Gow-Yi Tzou, 2001, "Theoretical Study on the Cold Sandwich Sheet Rolling Considering Coulomb Friction,” Journal of Materials Processing Technology, Vol. 114, No. 1, pp. 41-50. SCI, IF=2.041

  17. Gow-Yi Tzou* and Ming-Nan Huang, 2001,"Study on Minimum Thickness for Asymmetrical Hot and Cold PV Rolling of Sheet Considering Constant Shear Friction", Journal of Materials Processing Technology, Vol. 119, No. 1-3, pp. 229-233. SCI, IF=2.041

  18. Ming-Nan Huang and Gow-Yi Tzou*, 2002, "Study on Compression Forming of the Rotating Disk Considering the Hybrid Friction," Journal of Materials Processing Technology, Vol. 125-126, pp. 421-426. SCI, IF=2.041

  19. Gow-Yi Tzou*, Anh-Kiet Tieu, and Ming-Nan Huang, 2002, " Analytical Approach to the Cold-and-hot Bond Rolling of Sandwich Sheet with Outer Hard and Inner Soft Layers," Journal of Materials Processing Technology, Vol. 125-126, pp. 664-669. SCI, IF=2.041

  20. Gow Yi Tzou*, Ming-Nan Huang, Ching-Jyi Chen, 2002, "Study of Asymmetrical Cold-and-Hot Rolling of Three-Layer Bounded Clad Sheet," Key Engineering Materials, Vol. 233-236, pp. 359-364. SCI, IF=0.224

  21. Gow-Yi Tzou* and Ming-Nan Huang, 2003, "Analytical Modified Model of the Cold Bond Rolling of Unbounded Double-layers Sheet Considering Hybrid Friction," Journal of Materials Processing Technology, Vol. 140, pp. 622-627. SCI, IF=2.041

  22. Ming-Nan Huang and Gow-Yi Tzou*, 2003, "Investigation on Comparisons Between two Analytical Models of Sandwich Sheet Rolling Bonded Before Rolling," Journal of Materials Processing Technology, Vol. 140, pp. 598-603. SCI, IF=2.041

  23. Hung-Hsiou Hsu, Gow-Yi Tzou, 2003, "Two Analytical Models of Double-layer Clad Sheet Compression Forming Based on the Upper Bound and the Slab Methods," Journal of Materials Processing Technology, Vol. 140, pp. 604-609. SCI, IF=2.041

  24. Sergei Alexandrov, Gow-Yi Tzou, 2003, "Friction and Upper Bound Method," Journal of Yung-Ta Institute of Technology & Commerce, Vol. 4, No. 1, pp.1-12.

  25. Sergei Alexandrov, Gow-Yi Tzou, and Shao-Yi Hsia, 2004, "A New Upper Bound Solution for a Hollow Cylinder Subject to Compression and Twist," Journal of Mechanical Engineering Science, Vol. 218, No. C4, pp. 369-375.  SCI, IF=0.633

  26. Gow-Yi Tzou*, Thomas Neitzert, and Ming-Nan Huang, 2004, "A New Analytical Approach to the Cold and Hot Bond Rolling of Unbounded Clad Sheet With Constant Shear Friction," Key Engineering Materials, Vols. 274-276, pp. 999-1004. SCI, IF=0.224

  27. Ming-Nan Huang and Gow-Yi Tzou*, 2004," New Corresponding Relationships between Frictional Coefficient and Frictional Factor in Compression Forming of a Rotating Circular Disk," Key Engineering Materials, Vols. 274-276, pp. 409-414. SCI, IF=0.224

  28. Wen-Tung Chien, Gow-Yi Tzou*, Ming-Nan Huang, Wen-Hsin Tseng, 2004, "Theoretical Analysis of Rotating Compression Forming of Ring Considering Constant Shear Friction," Journal of Steel and Related Materials---STEEL GRIPS, Vol. 2, pp. 671-676. EI

  29. Ming-Nan Huang, Gow Yi Tzou*, Students, 2005, "General Solutions of the Bond Rolling of Unbounded Sandwich Sheet with Outer Soft and Inner Hard Layers," Journal of Chinese Society Mechanical Engineering, Vol. 26, No. 5, pp. 629-635. SCI, IF=0.274

  30. Hung-Hsiou Hsu, Gow-Yi Tzou, Wen-Tung Chien, and Wen-Hsin Tseng, 2005, "Study on Rotating Compression Forming of Ring Based on the Finite Element Method and Experiment," Journal of Chinese Society Mechanical Engineering, Vol. 26, No. 5, pp. 485-491. SCI, IF=0.274

  31. Ching-Jyi Chen, Sai-Chih Pan, and Gow‑Yi Tzou, 2005, "Study on Optimization Experiment Design of Parameters of Cold-and-Hot Bond Rolling of Two-Layer Unbounded Clad Sheet," Journal of Yung-Ta Institute of Technology & Commerce, Vol. 6, No. 1, pp. 99-108.

  32. Gow-Yi Tzou* and Sergei Alexandrov, 2006, "An Upper Bound Solution for Upsetting of Two-Layer Cylinder," Materials Science Forum, Vols. 505-507, pp. 1303-1308. SCI, IF=0.399

  33. Hung-Hsiou Hsu and Gow-Yi Tzou*, 2006, "A Study on Rotating Compression Forming of Ring Based on the Upper Bound Method" Materials Science Forum, Vols. 505-507, pp. 1309-1314. SCI, IF=0.399

  34. Gow-Yi Tzou* and Ming-Nan Huang, 2006, "General Solutions of the Bond Rolling of Unbounded Sandwich Sheet with Outer Hard and Inner Soft Layers" Journal of Chinese Society Mechanical Engineering, Vol. 27, No. 1, pp. 93-98. SCI, IF=0.274

  35. Ching-Jyi Chen, Gow Yi Tzou*, and Ming-Nan Huang, 2006, "Study on the Twist Compression Forming Based on the Upper Bound and Slab Methods," Journal of f Materials Processing Technology, Vol. 174, pp. 266-271. SCI, IF=2.041

  36. Gow-Yi Tzou*, Hung-Hsiou Hsu, Yun-Hsiu Hsiao, 2006, "Investigation of a Slab Method Analysis and FEM Simulation on Rotating Compression Forming of Ring, "Journal of Materials Processing Technology, Vol. 177, pp. 150-153. SCI, IF=2.041

  37. Gow-Yi Tzou*  and Sergei Alexandrov, 2006, "An Upper Bound Solution for a Solid Viscous Cylinder Subject to Compression and Twist, "Journal of Materials Processing Technology, Vol. 177, pp. 159-162. SCI, IF=2.041

  38. Sergei Alexandrov, Gow-Yi Tzou, Ming-Nan Huang, 2006, "Plane Strain Compression of Rigid / Perfectly Plastic Multi-layer Strip Between Parallel Platens", Acta Mechanica, Vol. 184, pp. 103-129. SCI, IF=1.268

  39. Sia-Chi Pan, Ming-Nan Huang, Gow-Yi Tzou, 2006, "Analysis of Asymmetrical Cold and Hot Bond Rolling of Unbounded Clad Sheet Under Constant Shear Friction", Journal of Materials Processing Technology, Vol. 177, pp. 114-120. SCI, IF=2.041

  40. Ming-Nan Huang, Gow-Yi Tzou*, 2006, "Upper Bound Solution to Compression Forming of Three-Layer Bounded Clad Sheet, "Key Engineering Materials, pp. 731-736. SCI, IF=0.224

  41. Gow-Yi Tzou* and Sergei Alexandrov, 2007, "An Upper Bound Solution for a Two-Layer Cylinder Subject to Compression and Twist," Key Engineering Materials, Vols. 345-346, pp. 37-40. SCI, IF=0.224

  42. Sergei Alexandrov and Gow-Yi Tzou, 2007, "Influence of Plastic Anisotropy on Limit Load of Welded Joints With Cracks," Key Engineering Materials, Vols. 345-346, pp. 425-428. SCI,  IF=0.224

  43. Gow-Yi Tzou*, Ching-Jyi Chen, and Ming-Nan Huang, 2007, "Study on the Twist Forging Forming of Cylinder," Forging, pp. 5-12.

  44. Gow-Yi Tzou*, Wen-Tng Chien, Ming-Nan Huang, 2007, "Slab Method Analysis and FEM Simulation on Rotating Compression Forming of Cylinder Considering Coulomb Friction," Materials Science Forum, Vols. 561-565, pp. 73-76. EI

  45. Sergei Alexandrov, Gow-Yi Tzou, Shao-Yi Hsia, 2008, "Effect of plastic anisotropy on the limit load of highly under matched welded specimens in bending," Engineering Fracture Mechanics, Vol. 75, pp. 3131-3140. SCI, IF=1.662

  46. Gow-Yi Tzou*, Ching-Jyi Chen, Hsu-Jeng Liu, Hsiang-Yu Teng, 2008, "Optimization of FEM Simulation on the Compression Forming of Double-Layer Clad Sheet", Forging, Vol. 17, No. 1, pp. 22-29.

  47. Dyi-Cheng Chen, Jia-Ci Wang, Gow-Yi Tzou, 2008, "A Finite Element Investigation into the Changing Channel Angular Extrusion of Brass Alloy, " Materials Science Forum, Vols. 594, pp. 90-95. EI

  48. 鄒國益*、吳永祁, 2008, "逆向擠製成形有限元素模擬分析," Taiwan Association of Technological and Vocational Education, Vol. 3, pp. 29-35.

  49. Sai-Chih Pan, Gow-Yi Tzou*, Ming-Nan Huang, Chien-Wen Huang, 2008, " Analytical Model of Asymmetrical Cold Bond Rolling of Two-layer Unbonded Clad Sheet Under Coulomb Friction," Steel Research International, Vol. 79, No. 11, pp. 734-741. SCI, IF=1.023

  50. Gow-Yi Tzou*, Ming-Nan Huang, 2008, "Study on Rotating Compression of Two-layer Clad Cylinder With Constant Shear Friction," Steel Research International, Vol. 79, No. 11, pp. 748-755. SCI, IF=1.023

  51. Gow-Yi Tzou*, Wen-Tng Chien, 2008, "FEM Simulation on Deep Drawing of Vessel Head of Double-layer Bonded Sheet With Coulomb Friction," Steel Research International, Vol. 79, No. 11, pp. 756-763. SCI, IF=1.023

  52. Elena Lyamina, Gow-Yi Tzou, Shao-Yi Hsia, 2009,"An Upper Bound Solution for Upsetting of Anisotropic Hollow Cylinders," Materials Science Form Vol. 623, pp. 71-78. EI

  53. 鄒國益*、溫炯亮、鄧香菱, 2010, "雙層複合圓環旋轉壓縮成形之有限元素模擬, 台灣鍛造協會, " Vol. 19. No.3, pp. 7-17.

  54. 鄒國益*、柯建帆, 2011, "車輛煞車扣件冷鍛成型分析與設計", Journal of Precision Machinery and Manufacturing Technology, Vol. 1, No. 1, pp. 1~10.

  55. ery and Manufacturing Technology, Vol. 1, No. 2, pp. 44~53

  56. 黃德福、鄒國益*、郭俊廷,  2011, "切削旋入扣件多道次鍛造成形製程動態模擬與有限元素模擬", Journal of Precision Machinery and Manufacturing Technology, Vol. 1, No. 2, pp. 67~75.

  57. Gow-Yi Tzou, 2012," Upper Bound Method and Slab Method with Experiment on Rotating Upsetting of Double-Layer Clad Cylinder, Advanced Science Letters ", Vol. 9, 785–789. SCI, IF=1.253 

  58. G.Y. Tzou*, C.C. Hsu, C.T. Kuo, 2012, "FEM Simulation Comparisons of Backward Extrusion," Advanced Materials Research, Vol. 579, pp. 42-51. EI

  59. S.C. Pan, G.Y. Tzou, Y. M. Hwang, 2012, "General Solution to Bond Rolling of Unbounded Sandwich Sheet with Outer Soft and Inner Hard Layers Considering Coulomb Friction," Advanced Materials Research, Vol. 579, pp. 68-77. EI

  60. 鄒國益*、郭俊廷, 2012, "精微銅扣件多道次鍛造成形有限元素模擬," 鍛造季刊, July, Vol. 21. No.2, pp. 15-20.

  61. 鄒國益*、黃忠義, 2012, "圓形軸承螺帽多道次冷間成形有限元素模擬分析", Journal of  Precision Machinery and Manufacturing Technology, Vol. 2, No. 1, pp. 38~47.

  62. 鄒國益*、姜庭隆、邱中毓, 2012, "考慮定剪摩擦之已結合雙層複合圓環層材旋轉壓縮成形探討",  Journal of Precision Machinery and Manufacturing Technology, Vol. 2, No. 2, pp. 36~46.

  63. Gow-Yi Tzou, 2013, "FEM Simulation and Experimental Verification on Rotating Forging of Three-Layer Clad Cylinder Considering Constant Shear Friction, "Advanced Materials Research, Vols. 602-604, pp. 2214-2218. EI

  64. Hsiang-Yu Teng, Gow-Yi Tzou*, Yeong-Maw Huang, 2013, "FEM Simulation on Rotating Piercing Process With Coulomb Friction," Applied Mechanics and Materials, Vols. 284-287, pp. 127-131. EI

  65. Ming-Chao Sun, Gow-Yi Tzou*, Liang-An Zheng, 2013, "Study on Multi-Stage Cold Forging of Stainless Automotive Battery Fastener," Applied Mechanics and Materials, Vols. 284-287, pp. 211-215. EI

  66. Gow-Yi Tzou, 2013, "Processing Animation and Forming Simulation of Dray Fasteners, " World Academy of Science, Engineering and Technology, Vol. 79, pp. 1229-1233. EI

  67. Ming-Chao Sun, Gow-Yi Tzou*, Liang-An Zheng, 2013, "Processing Animation Simulation and FEM Analysis of Multi-Stage Cold Forging of Stainless Automotive Battery Fastener," Indian Journal of Engineering & Materials Sciences, Vol. 20, pp. 219-224. SCI, IF=0.641

  68. Ching-Wei Shih, Gow-Yi Tzou*, Kao-Hua Chang, 2014, "Effects of Forging Stream Line on Tensile Strength Using FEM Simulation, "Advances in Mechanical Engineering, Vol. 2014, Article ID:216246, pp. 1-9. SCI, IF=1.062

  69. Gow-Yi Tzou*, Ming-Chao Sun, Liang-An Zheng, 2014, "The Die Stress and Forging Stream Line Analysis of Stainless Automotive Battery Fastener," Materials Research Innovations, Vol. 18, Suppl. 3, pp. S3-31~S3-37.  SCI, IF=0.473

  70. Gow-Yi Tzo*, Yeong-Maw Hwang, Hsiang-Yu Teng, 2014, " Study on Rotating Compression Forming of Double-Layer Clad Ring Considering Coulomb Friction, "International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 3, July, pp. 191-199. SCI (In 2014, this journal just became a SCI Journal)

  71. Ching-Wei Shih, Gow-Yi Tzou*, Kao-Hua Chang, 2014, "FEM Simulation and Experimental Verification on Multi-Stage Forming of Flange Sleeve, "Journal of Chinese Society Mechanical Engineers, Vol. 35, pp. 243-250, June 2014.  SCI, IF=0.274

  72. Sen-Chyi Weng, Gow-Yi Tzou*, Bor-Lih Kuo, 2014, "Bulging Investigation of Cylinder Compression Forming Using Upper Bound Analysis, "Advance Material Research, Vol. 939, pp. 283-290.  EI.

  73. Gow-Yi Tzou*, Sen-Chyi Weng , Bor-Lih Kuo, 2014, " Slab Analysis and FEM Simulation on Rotating Compression Forming of Double-Layer Clad Cylinder Under Constant Shear Friction, " Key Engineering Materials, Vols. 622-623, pp. 672-678.  EI.

  74. Gow-Yi Tzou*, Yeong-Maw Huang, Sai-Chih Pan, 2015, "Experimental Investigation and FEM Simulation on Material Behaviors of Cylinder with the Rotating Die," Key Engineering Materials, Vol. 626, pp. 269-274.  EI.

  75. Gow-Yi Tzou*, Yeong-Maw Hwang, Hsiang-Yu Teng, 2015, "Study on Rotating Compression Forming of Double-Layer Clad Ring Considering Constant Shear Friction, " Key Engineering Materials, Vol. 626, pp. 287-292. EI

  76. Kao-Hua Chang, Ching-Wei Shih, Gow-Yi Tzou*, 2015, "Stress Analysis and Improvement of Extrusion Dies Using Combination of FEM with Taguchi Method, " Applied Mechanics and Materials, Vols.764-765, pp. 143-147. EI

  77.  Gow-Yi Tzou*, Yeong-Maw Hwang, Hsiang-Yu Teng, 2015, "FEM Simulation and Experimental Verification on Rotating Compression Forming of Double-Layer Clad Ring Considering Shear Friction, "Applied Mechanics and Materials, Vols.764-765, pp.280-284. EI

  78. Sen-Chi Weng, Bor-Lih Kuo, Gow-Yi Tzou*, 2015, "Bulging Deformation Prediction and Experimental Verification of Bonded Double-Layer Clad Cylinder in Rotating Compression, " Key Engineering Materials, Vol. 661, pp. 83-90. EI

  79. Kao-Hua Chang, Ching-Wei Shih, Gow-Yi Tzou*, 2015, "Stress Analysis of Forging Dies for Inverse Extrusion, " Key Engineering Materials, Vol. 661, pp. 44-51. EI

  80. Gow-Yi Tzou*, Yeong-Maw Huang, Hsiang-Yu Teng, 2015, "FEM Simulation on Rotating Piercing Process With Constant Shear Friction, "Journal of Chinese Society Mechanical Engineers, Accepted.  SCI

  81. Kao-Hua Chang, Ching-Wei Shih, Gow-Yi Tzou*, 2015, "defect Improvement of Extrusion Dies Using Combination of FEM Stress Analysis with Taguchi Method, " Transactions of the Canadian Society for Mechanical Engineering, Accepted.  SCI

 

項目符號研討會論文

 @INTERNATIONAL CONFERENCES

  1. Gow-Yi Tzou and Yeong-Maw Hwang, 1996, "Analysis and Experiment on Asymmetrical Sheet Rolling," Proc. of 5th International Conference on Technology of Plasticity, Columbus, Ohio, U.S.A, October 7-10, pp. 83-86.

  2. Gow-Yi Tzou, 1997, "Study on Relationship Between Frictional Coefficient and Frictional Factor for Asymmetrical Sheet Rolling," Proc. of Plasticity‘97: the 6th International Symposium on Plasticity and its Current Applications, Juneau, Alaska, U.S.A, July 14-15, pp. 413-414.

  3. Gow-Yi Tzou and Ming-Nan Huang, 1998, "Analysis of Minimum Thickness for Asymmetrical Cold PV Rolling of Sheet, "Proc. the 7th International Conference on Steel Rolling, Makuhari, Chiba, Japan, November 9-11, pp. 216-220.

  4. Gow-Yi Tzou and Ming-Nan Huang, 1999, "Study on Minimum Thickness for Asymmetrical Cold-and-Hot PV Rolling of Sheet Considering Constant Shear Friction," Proc. International Conference on Advances in Materials and Processing Technologies, AMPT’99/IMC16, Dublin, Ireland, August 3-6, Volume I, pp. 249-256. 

  5. Gow-Yi Tzou, 1999, "An Analytical Coulomb Friction Model on the Cold Sandwich Sheet Rolling by the Slab Method," Proc. of 6th International Conference on Technology of Plasticity, Nuremberg, Germany, September 19-24, Volume III, pp. 1903-1908.

  6. Gow-Yi Tzou and Ming-Nan Huang, 1999, "Analysis of Limit Cases for Asymmetrical Cold Rolling of Clad Sheet," Proc. of 6th International Conference on Technology of Plasticity, Nuremberg, Germany, September 19-24, pp. 1897-1902.

  7. Gow-Yi Tzou and Ming-Nan Huang, 2000, "Study on Limit Cases for Asymmetrical Cold and Hot Rolling of Clad Sheet," Proc. of Plasticity’2000: the 8th International Symposium on Plasticity and its Current Applications, Whistler, Canada, July 17-21, pp. 261-263. 

  8. Ming-Nan Huang and Gow-Yi Tzou, 2000, "Investigation on Limit Conditions Generating Hybrid Friction in Symmetrical Sheet Rolling," Proc. of Plasticity ‘2000: the 8th International Symposium on Plasticity and its Current Applications, Whistler, Canada, July 17-21, pp. 231-233.

  9. Gow-Yi Tzou and Ming-Nan Huang, 2000, "Analysis of the Cold and Hot Bond Rolling of Clad Sheet," Proc. the 8th International Conference on Metal Forming, Krakow, Poland, September 3-7, pp. 315-321.

  10. Ming-Nan Huang and Gow-Yi Tzou, 2001, "Study on the Bond Rolling of unbounded Clad Sheet Considering Coulomb Friction," Proc. the 4th International Conference on ESAFORM2001, Liege, Belgium, April 23-25, Volume II, pp. 885-858.

  11. Gow-Yi Tzou and Ming-Nan Huang, 2001, "Study on the Cold-and-Hot Bond Rolling of unbounded Sandwich Sheet With Outer Soft and Inner Hard Layers," Proc. the 4th International Conference on ESAFORM2001, Liege, Belgium, April 23-25, Volume II, pp. 859-862.

  12. Gow-Yi Tzou and Ming-Nan Huang, 2001, "Study on the Compression Forming of Clad Sheet, " Proc. International Conference on Advances in Materials and Processing Technologies, AMPT’01, Madrid, Spain, September 18-21, Volume II, pp. 711-718.

  13. Ming-Nan Huang, Gow-Yi Tzou, and Anh-Kiet Tieu, 2002, "Theoretical Analysis of the Compression Forming of the Sandwich Sheet Under Coulomb Friction," Proc. of Plasticity’2002: the 9th International Symposium on Plasticity and its Current Applications, Aruba, USA, January 3-9, pp. 403-405

  14. Gow-Yi Tzou, Ming-Nan Huang, and Ching-Jyi Chen, 2002, "An Analytical Approach to Rotating Compression Forming of Circular Disk Considering Constant Shear Friction," Proc. of Plasticity ‘2002: the 9th International Symposium on Plasticity and its Current Applications, Aruba, USA, January 3-9, pp. 445-447.

  15. Gow-Yi Tzou and Ming-Nan Huang, 2002, "Theoretical Analysis of the Cold-and-Hot PV Wrapping Bond Rolling of Unbounded Double-Layers Sheet," Proc. the JSME/ASME International Conference on Materials and Processing, Honolulu, Hawaii, USA, October 15-18, Vol. 2, pp. 53-64.

  16. Gow-Yi Tzou, 2002, "Study on Asymmetrical Rolling of the Three-Layer Bounded Clad Sheet," Proc. 7th International Conference on Technology of Plasticity, Yokohama, Japan, October 27-November 1, Vol. 1, pp. 535-540.

  17. Gow-Yi Tzou, Ming-Nan Huang, and Ching-Jyi Chen, 2003, " Asymmetrical Bond Rolling of Three-Layer Unbounded Clad Sheet Considering Constant Shear Friction," Proc. of Plasticity ‘2003: the 10th International Symposium on Plasticity and its Current Applications, Quebec, Canada, July 7-11, pp. 400-402. 

  18. Hung-Hsiou Hsu, Gow-Yi Tzou, 2003, " An Upper Bound Approach of Compression Forming of Bounded Sandwich Sheet," Proc. of Plasticity ‘2003: the 10th International Symposium on Plasticity and its Current Applications, Quebec, Canada, July 7-11, pp. 370-372.

  19. Ming-Nan Huang and Gow-Yi Tzou, 2003, " Comparisons between two Analytical Models of Asymmetrical Cold Rolling of Three-layer Bounded Clad Sheet," Proc. of Plasticity ‘2003: the 10th International Symposium on Plasticity and its Current Applications, Quebec, Canada, July 7-11, pp. 373-375. 

  20. Gow-Yi Tzou, Thomas Neitzert, Hung-Hsiou Hsu, 2004, "Study on Compression Forming of Two-layer Bounded Clad Sheet," Engineering Revolution--2004 Joint SCENZ/FEANZ/SMNZI Conference, Hamilton, New Zealand, July 2, pp. 37-43.

  21. Ching-Jyi Chen, Gow-Yi Tzou, Jin-Bin Yang, Hung-Hsiou Hsu, 2004, " Theoretical Analysis and Prototype Machine Manufacture of Rotating Compressing Forming of Cylinder, " Proc. the 1st International Conference on New Forming Technology, Harbin, China, September 6-9, pp. 373-378. 

  22. Gow-Yi Tzou, Thomas Neitzert, and Ming-Nan Huang et al., 2004, "Study on Three-Layer Bounded Clad Sheet Compression Forming," Proc. the 11th International Conference on Machine Design and Production, Antalya, Turkey, October 13-15, pp. 147-158. 

  23. Sergei Alexandrov, Gow-Yi Tzou, and Shao-Yi Hsia, 2004, "A New Upper Solution to Twist Compression Forming of Cylinder," Proc. the 11th International Conference on Machine Design and Production, Antalya, Turkey, October 13-15, pp. 207-216. 

  24. Hung-Hsiou Hsu, Gow-Yi Tzou, Yeong-Maw Hwang, and Hua-Liang Hu, 2004,"A Numerical Simulation on Friction Stir Process of Aluminum Alloy by Finite Element Method," Proc. the 11th International Conference on Machine Design and Production, Antalya, Turkey, October 13-15, pp. 217-230.

  25.  Gow-Yi Tzou, Ming-Nan Huang, Ching-Jyi Chen, 2006,"Analysis of the Rotating Compression Forming of Cylinder Based on the Upper Bound and Slab Methods," Proc. the 12th International Conference on Machine Design and Production, Kusadasi, Turkey, September 5-8, pp. 723-738.

  26. Sergei Alexandrov and Gow-Yi Tzou, 2006, "Plane-Strain Pure Bending of Two-layer Sheets at Large Strains," Proc. the 12th International Conference on Machine Design and Production, Kusadasi, Turkey, September 5-8, pp. 739-752.

  27. Gow-Yi Tzou, Yeong-Maw Hwang, Hua-Liang Hu, 2007, "Study on the Hemisphere Deep Drawing Process of Metal Sheet Based on the FEM Simulation," pp. 649-654.

  28. M.N. Huang, Gow-Yi Tzou, S.C. Pan, T.L. Chiang, Y.S. Chang, 2008, "General Solution to Bond Rolling of Unbounded Sandwich Sheet With Outer Hard and Inner Soft Layers Considering Coulomb Friction, " Proc. the 13th International Conference on Machine Design and Production, Istanbul, Turkey, September 3-5, pp. 327-338.

  29. Ching-Jyi Chen, Gow-Yi Tzou, Yeong-Maw Hwang, Hsiang-Yu Teng, 2008, " FEM Simulation on Compression Forming of Double-layer Clad Sheet With Coulomb Friction, " Proc. the 13th International Conference on Machine Design and Production, Istanbul, Turkey, September 3-5, pp. 339-353.

  30. Gow-Yi Tzou, Shao-Yi Hsia, Ming-Nan Huang, Fan-Yi Wu, 2008, " Slab Analysis of the Rotating Compression Forming of Porous Cylinder With Coulomb Friction, " Proc. the 13th International Conference on Machine Design and Production, Istanbul, Turkey, September 3-5, pp. 355-367.

  31. Dyi-Cheng Chen, Gow-Yi Tzou et al., 2008, "Study of Titanium Alloy in the Changing Channel Angular Extrusion," Proc. International Conference on Technology of Plasticity-ICTP2008, Gyeongiu, Korea, September 7-11, pp. 1537-1542.

  32. Gow-Yi Tzou, Chun- Mu Wu, Ming-Zhan Yeh 2009, "Effect of Various Shearing Conditions on the Rod Shearing Quality for Large Nuts," Proc. the 12th International Conference on Fracture, , Westin Ottawa, Canada, July 12-17, T11-1~T11-9.

  33. G.Y. Tzou,, T.L. Chiang, M.N. Huang, Y.S. Chang, 2010, " Slab Analysis and FEM Simulation on Rotating Compression Forming of Three-Layer Clad Cylinder Considering Constant Shear Friction," Proc. the 3rd International Conference on Advanced Manufacture, Kenting, Taiwan, February 2-5, P 181-01~P181-06, 2010

  34. Gow-Yi Tzou and Min-Shing Wu, 2011, "Effects of Rotating Compression Forming on the Material Behaviors of Cylinder," Proc. the 19th  International Symposium on Processing and Fabrication of Advanced Materials, Auckland, New Zealand, January 14-17, pp 227-233.

  35. Gow-Yi Tzou , 2011, "Upper Bound Method and Slab Method with Experiment on Rotating Upsetting of Double-layer Clad Cylinder," 2011 International Conference on Engineering Technology Innovation, Kenting, Taiwan, November 11-13, O1009-p. 135.

  36. G.Y. Tzou, C.C. Hsu, C.T. Kuo, 2012, "FEM Simulation Comparisons of Backward Extrusion," International Conference on Advanced Manufacture 2012, Yilan, Taiwan, March 4-8, S0013-p. 125.

  37. S.C. Pan, G.Y. Tzou, Y. M. Hwang, 2012, "General Solution to Bond Rolling of Unbounded Sandwich Sheet with Outer Soft and Inner Hard Layers Considering Coulomb Friction," International Conference on Advanced Manufacture 2012, Yilan, Taiwan, March 4-8, S00151-p. 129.

  38. Gow-Yi Tzou, 2012, " FEM Simulation and Experimental Verification on Rotating Forging of Three-Layer Clad Cylinder Considering Constant Shear Friction," The 2nd/2012 International Conference on Materials and Products Manufacturing Technology  (MPMT 2012, Guangzhou, China, September 22-23, MT7113.

  39. Hsiang-Yu Teng, Gow-Yi Tzou, Yeong-Maw Huang, 2012, "FEM Simulation on Rotating Piercing Process With Coulomb Friction," 2012 International Conference on Engineering Technology Innovation, Kaohsiung, Taiwan, November 2-6, J1206-p. 243.

  40. Ming-Chao Sun, Gow-Yi Tzou, Liang-An Zheng, 2012, "Study on Multi-Stage Cold Forging of Stainless Automotive Battery Fastener" 2012 International Conference on Engineering Technology Innovation, Kaohsiung, Taiwan, November 2-6, J1166-p. 233.

  41. Gow-Yi Tzou , 2013, " Processing Animation and Forming Simulation of Dray Fasteners, " Proc. International Conference on Manufacturing Engineering, Stockholm, Sweden, July 15-16, World Academy of Science, Engineering and Technology, Vol. 79, pp. 1229-1233.

  42. Ching-Wei Shih, Gow-Yi Tzou, Kao-Hua Chang, 2013, "Study on Multi-Stage Forming of Flange Sleeve Using FEM Simulation and Experimental Verification," Proc. International Conference on Advances in Materials and Processing Technologies, AMPT’13, Taipei, Taiwan, September 22-29, Paper ID 32.

  43. Sen-Chyi Weng, Gow-Yi Tzou, Bor-Lih Kuo, 2013, "Bulging Investigation of Cylinder  Compression Forming Using Upper Bound Analysis," Proc. International Conference on Advances in Materials and Processing Technologies, AMPT’13, Taipei, Taiwan, September 22-29, Paper ID 87.

  44. Gow-Yi Tzou, Yeong-Maw Huang, Hsiang-Yu Teng, 2013, "FEM Simulation on Rotating Piercing Process With Constant Shear Friction," Proc. International Conference on Advances in Materials and Processing Technologies, AMPT’13, Taipei, Taiwan, September 22-29, Paper ID 274.

  45. Gow-Yi Tzou,Yeong-Maw Hwang, Hsiang-Yu Teng, 2014, "FEM Simulation on Rotating Piercing Process of Double-Layer Clad Sheet with Coulomb Friction," Proc. of the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, January 6-10, AIP Conference Proceedings, Vol. 1567, pp. 1085-1088.

  46. Gow-Yi Tzou, Bor-Lih Kuo, Sen-Chyi Weng, 2014, "Study on Bulging Behavior of Rotating Cylinder Compression Forming Based on Upper Bound Method and Experiment , " Proc. of the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, January 6-10, AIP Conference Proceedings, Vol. 1567, pp. 1103-1106.

  47. Gow-Yi Tzou, Yeong-Maw Hwang, Hsiang-Yu Teng, 2014, "Study on Rotating Compression Forming of Double-Layer Clad Ring Considering Constant Shear Friction, " 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications, Kaohsiung, Taiwan, September1-5, Paper ID:T114

  48. Gow-Yi Tzou,Yeong-Maw Hwang, Sai-Chih Pan, 2014, "Experimental Investigation and FEM Simulation on Material Behaviors of Cylinder With the Rotating Flat Die, " 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications, Kaohsiung, Taiwan, September1-5, Paper ID:.T127

  49. Gow-Yi Tzou, Sen-Chyi Weng , Bor-Lih Kuo, 2014, "Slab Analysis and FEM Simulation on Rotating Compression Forming of Double-Layer Clad Cylinder Under Constant Shear Friction," 15th International Conference on Metal Forming, Palermo, Italy, September 21-24.

  50. Kao-Hua Chang, Ching-Wei Shih, Gow-Yi Tzou, 2014, "Stress Analysis and Improvement of Extrusion Dies Using Combination of FEM With Taguchi Method," 2014 International Conference on Engineering Technology Innovation, Kenting, Pingtung, Taiwan, October 31-November 4, Paper ID:W1035

  51. Gow-Yi Tzou, Yeong-Maw Hwang, Hsiang-Yu Teng, 2014, "FEM Simulation and Experimental Verification on Rotating Compression Forming of Double-Layer Clad Ring Considering Shear Friction," 2014 International Conference on Engineering Technology Innovation, Kenting, Pingtung, Taiwan, October 31-November 4, Paper ID:W1036.

  52. Gow-Yi Tzou and You-Min Huang, 2014, "Optimization Study of Multi-Stage Forging of Micro/Meso Coppers," Proc. of the 7th Asian Workshop on Micro/Nano Forming Technology, Taipei, Taiwan, November 9-12, Paper ID:T7

  53. Sen-Chi Weng, Bor-Lih Kuo, Gow-Yi Tzou *, 2015, "Bulging Deformation Prediction and Experimental Verification of Bonded Double-Layer Clad Cylinder in Rotating Compression," Proc. of the 1st  International Conference on Precision Machinery and Manufacturing Technology, Kenting, Taiwan, May 22-24, Paper ID:ICPMMT-02.

  54. Kao-Hua Chang, Ching-Wei Shih, Gow-Yi Tzou *, 2015, " Stress Analysis of Forging Dies for Inverse Extrusion ," Proc. of the 1st  International Conference on Precision Machinery and Manufacturing Technology, Kenting, Taiwan, May 22-24, Paper ID:ICPMMT-12.

 

@DOMESTIC CONFERENCES

  1.  Yeong-Maw Hwang and Gow-Yi Tzou, 1992, "An Analytical Approach to Asymmetrical Cold Strip Rolling by Slab Method," Proc. the 9th Nat. Conf. of CSME, Taiwan, R. O. C. , pp. 23-30.

  2. Yeong-Maw Hwang and Gow-Yi Tzou, 1992, "An Analytical Approach to Asymmetrical Hot Strip Rolling by Slab Method," Proc. the 16th Conf. on Theo. Appl. Mech., Taiwan, R. O. C., pp. 579-586.

  3. Yeong-Maw Hwang and Gow-Yi Tzou, 1993, "Analysis of Asymmetrical Hot Strip Rolling by the Slab Method," Proc. the 10th Nat. Conf. of CSME, Taiwan, R. O. C., pp. 537-545.

  4. Gow-Yi Tzou, 1993, "The Study of Asymmetrical Strip Rolling for the Condition of Mixed Friction,"  Proc. the 8th T.V.E. Conf. R. O. C., pp. 90-99.

  5. Gow-Yi Tzou and Ching-Jyi Chen, 1994, "Stress Analysis of Asymmetrical Cold Strip Rolling Considering Effect of the Shear Stress at the Roll Gap," Proc. the 9th T.V.E. Conf. R. O. C., pp. 169-178.

  6. Gow-Yi Tzou and Yeong-Maw Hwang, 1994, "An Analytical Approach to Asymmetrical Strip Rolling Under Consideration of Hybrid Friction," Proc. the 11th Nat. Conf. of CSME, Taiwan, R. O. C., pp. 141-149.

  7. Gow-Yi Tzou and Yeong-Maw Hwang, 1994, "Analysis of Asymmetrical Cold Rolling of Clad Sheet Study on Asymmetrical Rolling ," Proc. the 18th Conf. on Theo. Appl. Mech, Taiwan, R. O. C., pp. 163-172.

  8. Gow-Yi Tzou and Yeong-Maw Hwang, 1995, "Theoretical and Experimental Analysis in Asymmetrical Strip Rolling," Proc. the 12th Nat. Conf. of CSME, Taiwan, R. O. C., pp. 367-375.

  9. Gow-Yi Tzou and Yeong Maw Hwang, 1995, "Study on Asymmetrical Cold and Hot Rolling of Clad Sheet Using the Slab Method," Proc. the 19th Conf. on Theo. Appl. Mech, Taiwan, R. O. C., December 8-9, pp. 207-216.

  10. Ching-Jyi Chen and Gow-Yi Tzou, 1996, "An analytical Approach to Effect of the Shear Stress at the Roll Gap on the Characteristics of Asymmetrical Cold and Hot Strip Rolling," Proc. the 11th T.V.E. Conf. R. O. C., March 15-16, pp. 389-397.

  11. Gow-Yi Tzou and Hua-Liang Hu, 1997, "Corresponding Relationship Between Frictional Coefficient and Frictional Factor on Asymmetrical Strip Rolling----- Corresponding Relationship I -----", Proc. the 14th Nat. Conf. of CSME, Taiwan, R. O. C., December 12-13, pp. 1-7.

  12. 黃敏郎、鄒國益, 1999," 板材對稱軋延時,兩種摩擦因子與摩擦係數轉換關係之比較," Proc. the 23nd Conf. on Theo. Applied Mech., Taiwan, R. O. C., December 17-18, pp.179-186.

  13. 黃敏郎、鄒國益, 2000, "考慮定剪摩擦之三明治板材冷熱間軋延解析模式", Proc. the 17th Nat. Conf. of CSME, Taiwan, R. O. C., December 8-9, Volume IV, pp. 437-444.

  14. 黃敏郎、鄒國益, 2001, "在庫倫摩擦下,圓盤旋轉壓縮成形理論分析", Proc. the 18th Nat. Conf. of CSME, Taiwan, R. O. C., December 8-9, Volume III, pp. 79-84.

  15. Gow-Yi Tzou, Ching-Jyi Chen, and Ming-Nan Huang, 2002, "Comparisons Between two Analytical Models of Compression Forming of Sandwich Sheet," Proc. the 17th T.V.E. Conf. R. O. C., April 18-19, Volume I (Industry), pp.141-150.

  16. Sergei Alexandrov and Gow-Yi Tzou, 2003, "Friction and Upper Bound Method," 2003年精密機械與製造技術研討會, May 29- June 1, pp.1-13.

  17. Gow-Yi Tzou, Shao-Yi Hshia, and Sergei Alexandrov, 2003, " New Solution of a Hollow Cylinder with Compression and Twist by Upper Bound Method, " SME國際製造工程學會中華民國分會---九十二年度年會暨第三屆精密機械製造研討會, pp. 410-415.

  18. Gow-Yi Tzou and Ming-Nan Huang, 2003,"Analysis of Compression Forming of Three-Layer Bounded Clad Sheet," Proc. the 27th Conf. on Theo. Appl. Mech., December 12-13, Taiwan, R. O. C., pp. 489-495.

  19. Ming-Nan Huang, Ching-Jyi Chen, and Gow-Yi Tzou, 2004, "Study on the Twist Compression Forming Based on the Upper Bound and Slab Methods," 2004年精密機械與製造技術研討會, June 3- June 5, pp. 225-233.

  20. Gow-Yi Tzou, Thomas Neitzert, Ming-Nan Huang, and Ching-Jyi Chen, 2004, "Investigation of the Cold-and-hot Bond Rolling of Two-layer Unbounded Clad Sheet," 2004年精密機械與製造技術研討會, June 3- June 5, pp. 3-17.

  21. Gow-Yi Tzou, Wen-Tung Chien, Ching-Jyi Chen, Ming-Nan Huang, Wen-Hsin Tseng, 2004, "Slab Analysis of Rotating Compression Forming of Ring With Coulomb Friction, " Proc. the 21st Nat. Conf. of CSME, Taiwan, R. O. C., December 26-27, pp. 3835-3840.

  22. Rong-Fong Fung, Ming-Nan Huang, Gow-Yi Tzou, Hung-Hsiou Hsu, Ching-Yin Yang, 2004, "Upper Bound Solution to Compression Forming of Three-layer Bounded Clad Sheet," Proc. the 21st Nat. Conf. of CSME, Taiwan, R. O. C., December 26-27, pp. 4003-4008.

  23. Sergei Alexandrov, Gow-Yi Tzou, Ming-Nan Huang, 2005, "Plane Strain Compression of Rigid/Perfectly Plastic Multi-layer Strip Between Parallel Platens, " 2005年精密機械與製造技術研討會, May 20- May 22, pp. 3-17.

  24.  Ching-Jyi Chen,  Sai-Chih Pan,  Gow-Yi Tzou, 2005, "Study on the Optimization Experiment Design of Parameters of Cold- and-Hot Bond Rolling of Two-Layer Unbounded Clad Sheet, " 2005年精密機械與製造技術研討會, May 20- May 22, pp. 368-374.

  25. Dyi-Cheng Chen, Yi-Ju Li, Gow-Yi Tzou, 2006, "Design of Titanium Alloy Equal Channel Angular Extrusion Process Using Taguchi Method, " The 30th National Conferences on Theoretical of Applied Mechanics, December 15-16, 2006, DYU, Changhwa, Taiwan, ROC.

  26. Ching-Jyi Chen,  Wen-Tung Chien,  Gow-Yi Tzou, 2006, "Study on the Optimization Experiment Design of Parameters of Cold-and-Hot Bond Rolling of Unbounded Sandwich Sheet, " 2006年精密機械與製造技術研討會, May 26- May 28, pp. A32-01~A32-08.

  27. Gow-Yi Tzou,  Wen-Tung Chien,, Ming-Nan Huang, 2007, "FEM Simulation on Deep Drawing of Clad Vessel Head Plate, " 2007年精密機械與製造技術研討會, May 18- May 20, pp. A47-01~A47-08.

  28. Gow-Yi Tzou,  Wen-Tung Chien,, Ming-Nan Huang, 2007, "Slab Analysis of Rotating Compression Forming of Cylinder with Coulomb Friction, " 2007年精密機械與製造技術研討會, May 18- May 20, pp. A53-01~A53-06.

  29. Gow-Yi Tzou,  Wen-Tung, Chien, Ming-Nan Huang, 2007, "Slab Analysis and Experimental Verification of Rotating Compression Forming of Double-Layer Clad Cylinder, " 2007年精密機械與製造技術研討會, May 18- May 20, pp. A67-01~A67-08.

  30. Gow-Yi Tzou, Hsu-Jeng Liu, Ming-Nan Huang, 2007, "FEM Simulation on Compression Forming of Double-Layer Clad Sheet, " 2007年精密機械與製造技術研討會, May 18- May 20, pp. A70-01~A70-09.

  31. Gow-Yi Tzou, Wen-Tung Chien et al., 2007, " Analytical Model of Rotating Compression Forming of Cylinder With Hybrid Friction", Proc. the 24th Nat. Conf. of CSME, Taiwan, R. O. C., November 23-24, pp. 3419~3424.

  32. Ming-Nan Huang, Gow-Yi Tzou et al., 2007, " Theoretical Analysis of Bond Rolling of Unbounded Sandwich Sheet With Outer Hard and Inner Soft Layers Considering Coulomb Friction", Proc. the 24th Nat. Conf. of CSME, Taiwan, R. O. C., November 23-24, pp.3399~3404.

  33. Gow-Yi Tzou, Hua-Liang Hu and Yeong-Maw Hwang, 2007, "Slab Analysis of the Rotating Compression Forming of Porous Cylinder with Constant Shear Friction", Proc. the 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 20, ISU, Kaohsiung, Taiwan, R.O.C., December 21-22, pp. J19-01~J19-06.

  34. Chen-Chung Chang, Gow-Yi Tzou, Wen-Tung Chien, Dong-Lin Tsai,, 2007, " Investigation on the Rotating Compression Forming of Cylinder With Constant Shear Friction", Proc. the 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 20, ISU, Kaohsiung, Taiwan, R.O.C., December 21-22, 2007, pp. J20-01~J20-05.

  35. Gow-Yi Tzou, Chen-Chung Chang, Hsu-Jeng Liu, Hsiang-Yu Teng, 2007, " FEM Simulation on Compression Forming of Three-Layer Clad Sheet With Constant Shear Friction", Proc.t the 31st National Conference on Theoretical and Applied Mechanics, December 21-22, 20, ISU, Kaohsiung, Taiwan, R.O.C., December 21-22, 2007, pp. J21-01~J21-07.

  36. Gow-Yi Tzou, Chang Chen-Chung, Wen-Tung Chien, Dong-Lin Tsai, 2007, "Optimization of FEM Simulation on the Rotating Compression Forming of Cylinder Considering Constant Shear Friction", 2007『屏東科技大學』暨『北京科技大學』第二屆學術交流研討會, December 24, pp. C016-1~C016-8.

  37. Gow-Yi Tzou, Ching-Jyi Chen, Hsu-Jeng Liu, Hsiang-Yu Teng, 2007, "Optimization of FEM Simulation on the Compression Forming of Double-Layer Clad Sheet With Coulomb Friction", 2007『屏東科技大學』暨『北京科技大學』第二屆學術交流研討會, December 24, pp. C018-1~C018-8.

  38. Gow-Yi Tzou, Yeong-Maw Hwang, Hsiang-Yu Teng, 2008, "FEM Simulation on Compresssion Forming of Three-Layer Clad Sheet With Coulomb Friction", The 32nd National Conference on Theoretical and Applied Mechanics, November 28-29, pp. J18-1~ J18-6.

  39.  Gow-Yi Tzou, Chun- Mu Wu, Ming-Zhan Yeh, 2008, "FEM Simulation of Rod Shearing for Large Dimension Nuts" The 32nd National Conference on Theoretical and Applied Mechanics, November 28-29, pp. J19-1~ J19-6.

  40. Gow-Yi Tzou, Yung-Chi Wu, 2008, "Optimization of FEM Simulation on Backward Extrusion Forming With Constant Shear Friction" 中國機械工程學會第二十五屆全國學術研討會, pp. C01-15-1~ C01-15-6.

  41. Gow-Yi Tzou, Ming-Nan Huang, Wen-Sheng Lee, 2008, "Simulation Optimization of FEM on the Rotating Compression of Double-Layer Bounded Clad Cylinder with Constant Shear Friction", 中國機械工程學會第二十五屆全國學術研討會, pp. C01-29-1~ C01-29-6.

  42. Gow-Yi Tzou, Yeong-Maw Hwang, Hsiang-Yu Teng, 2009, "Computer Aided Design and Process Animation Simulation of Hexagonal Nuts", 2009 Conference on Precision Machinery and Manufacturing Technology-PMMT 2009, pp. E07-01~ E07-08.

  43. Gow-Yi Tzou, Jen -Tsung Huang , Duc-Tuyen Pham, 2009, " Computer Aided Design and Processing Animation Simulation of Fasteners", 2009 Conference on Precision Machinery and Manufacturing Technology-PMMT 2009, pp. E09-01~ E09-06.

  44. 鄒國益、吳村木、葉明展,  2009"車輛螺帽多道次鍛造成形之研究",  2009 Conference on Precision Machinery and Manufacturing Technology-PMMT 2009, pp. C85-01~ C85-06.

  45. 鄒國益、黃仁聰、郭俊廷、吳永祁, "逆向擠製成形有限元素模擬之比較, 2009 Conference on Precision Machinery and Manufacturing Technology-PMMT 2009, pp. C85-01~ C85-06.

  46. Gow-Yi Tzou, Jen -Tsung Huang , Duc-Tuyen Pham, 2009, " Computer Aided Design and Processing Animation Simulation of Fasteners", 2009 Conference on Precision Machinery and Manufacturing Technology-PMMT 2009, pp. E09-01~ E09-06.

  47. Gow-Yi Tzou, Yeong-Maw Hwang, Hsiang-Yu Teng, 2009, "Computer Aided Design and Process Animation Simulation of Hexagonal Nuts", 2009 Conference on Precision Machinery and Manufacturing Technology-PMMT 2009, pp. E07-01~ E07-08.

  48. 鄒國益、黃德福、鄧翔明,  2010, "定剪摩擦下精密板金旋轉沖孔之有限元素模擬",2010 Conference on Precision Machinery and Manufacturing Technology-PMMT 2010, May 21-23, pp. C66-01~ C66-09.

  49. 潘賽智、黃敏郎、鄒國益、尤廣毅,  2010, "庫倫摩擦下未結合外軟內硬三明治板材結合冷間軋延泛用型理論解析",2010 Conference on Precision Machinery and Manufacturing Technology-PMMT 2010, May 21-23, pp. C67-01~ C67-08.

  50. 鄒國益、周敬雄、黃裕仁,  2010, "球頭螺栓電腦輔助設計與製程動態模擬",2010 Conference on Precision Machinery and Manufacturing Technology-PMMT 2010, May 21-23, pp. E01-01~ E01-07.

  51. 鄒國益、柯建帆,  2010, "車輛扣件冷鍛成型分析與設計", 2010 Conference on Precision Machinery and Manufacturing Technology-PMMT 2010, May 21-23, pp. E02-01~ E02-012.

  52. 鄒國益、孫明照、葉明展、鄧翔明,  2010, "汽車電瓶接頭螺絲多道次鍛造成形之研究", 2010 Conference on Precision Machinery and Manufacturing Technology-PMMT 2010, May 21-23, pp. E10-01~ E10-08.

  53. 鄒國益、楊斯淳, 2010, "定剪摩擦下2D有限元素模擬逆向擠製成形負荷最佳化", 中國機械工程學會第二十七屆全國學術研討會, December 10-11, pp. DD07-011-1~ DD07-011-6.

  54. 鄒國益、黃德福、郭俊廷, 2010, "切削旋入扣件多道次鍛造成形之研究", 中國機械工程學會第二十七屆全國學術研討會, December 10-11,pp. DD07-017-1~ DD07-017-1-6.

  55. 鄒國益、吳明勳, 2010, "在定剪摩擦下多孔性圓環旋轉壓縮成形之研究 ", 中華民國力學學會第34屆全國力學會議, November 19-20, pp. C0019-1~ C0019-7.

  56. 鄒國益、廖宗錡, 2010, "機車軸承多道次冷鍛成形之研究 ", 中華民國力學學會第34屆全國力學會議, November 19-20, pp. J0021-1~ J0021-6.

  57. 鄒國益、黃德福、鄧翔明,  2010, "定剪摩擦下精密板金旋轉沖孔之有限元素模擬", 2010 Conference on Precision Machinery and Manufacturing Technology-PMMT 2010, May 21-23, pp. C66-01~ C66-09.

  58. 鄒國益、施經緯,  2011, "法蘭套管成形模擬與模具應力分析", 2011 Conference on Precision Machinery and Manufacturing Technology-PMMT 2011, May 20-22, pp. E007-01~ E007-08.

  59. 鄒國益、陳義松,  2011, "六角凸緣螺絲成形有限元素模擬與分析", 2011 Conference on Precision Machinery and Manufacturing Technology-PMMT 2011, May 20-22, pp. E006-01~ E006-08.

  60. 鄒國益、黃德福、鄧翔明,  2011, "耕耘機零件多道次冷鍛成形設計與分析", 2011 Conference on Precision Machinery and Manufacturing Technology-PMMT 2011, May 20-22, pp. E003-01~ E003-08.

  61. 鄒國益、楊斯淳,  2011, "庫倫摩擦下2D有限元素模擬逆向擠製成形特性最佳化", 2011 Conference on Precision Machinery and Manufacturing Technology-PMMT 2011, May 20-22, pp. D030-01~ D030-08.

  62. 鄒國益、吳明勳、黃敏郎,  2011, "應用有限元素模擬探討鋁合金圓柱旋轉壓縮成形於晶粒尺寸之影響", 2011 Conference on Precision Machinery and Manufacturing Technology-PMMT 2011, May 20-22, pp. D034-01~ D034-09 (學界科專計畫編號:99-EC-17-A-05-S1-122).

  63. 鄒國益、李麗蓉,  2011, "應用賽局理論於台灣扣件產業之競爭策略 ", 2011 Conference on Precision Machinery and Manufacturing Technology-PMMT 2011, May 20-22, pp. F002-01~ F002-08.

  64. 鄒國益、姜庭隆、邱中毓,  2011, "定剪摩擦下圓環旋轉壓縮成形之切片分析與有限元素模擬", 2011 第18屆三軍軍官學校基礎學術研討會, May 20-22, pp. B33-01~ B33-08.

  65. 吳家慶、刁建成、楊誌欽、鄒國益、楊證富, 2012, "鋰摻雜氧化鎳透明導電膜之備製", 2012 Conference on Precision Machinery and Manufacturing Technology-PMMT 2012, May 18-20, pp. C014-1~ C014-6.

  66. 廖郁菁、吳家慶、刁建成、楊誌欽、鄒國益、楊證富, 2012, "不同雜質摻雜對氧化鋅薄膜之光學特性影響", 2012 Conference on Precision Machinery and Manufacturing Technology-PMMT 2012, May 18-20, pp. C014-1~ C015-7.

  67. 鄒國益、姜庭隆、邱中毓,2012,"考慮定剪摩擦下,應用DEFORM-3D有限元素軟體於已結合雙層複合圓環層材旋轉壓縮成形之研究", 2012全國精密製造研討會,November 9,pp. PMM014-1~ PMM014-6.

  68. 鄒國益、黃敏郎、姜庭隆、邱中毓,2012,"定剪摩擦下已結合雙層複合圓環層材旋轉壓縮成形分析",中華民國力學學會第三十六屆全國力學會議,November 16-17,pp. H005-1~H005-7.

  69. 鄒國益、姜庭隆、邱中毓,2012,"考慮定剪摩擦下已結合雙層複合圓環旋轉壓縮成形之有限元素模擬最佳化", 2012彰雲嘉大學校院聯盟學術研討會,December 7,pp. F4-1~F4-12.

  70. 鄒國益、黃忠義,2012,"圓形軸承螺帽多道次冷間成形有限元素模擬分析",中國機械工程學會第二十九屆全國學術研討會,December 7~8,pp. D05-1723-1~ D05-1723-6.

  71. 鄒國益、 劉永田、裴功德,2012,"六角凸緣車輛螺栓多道次鍛造成形有限元素模擬",中國機械工程學會第二十九屆全國學術研討會,December 7~8,pp. D05-1998-1~ D05-1998-5.

  72. 林昆龍、鄒國益,2013,"凸緣焊接螺帽成形有限元素模擬參數設計最佳化",臺灣扣件產業技術發展協會,February 18,pp. C-1~ C-11.

  73. 施經緯、鄒國益、張高華、蔡兆祥,2013,"運用FEM協助扣件成形設計及不良排除",臺灣扣件產業技術發展協會,February 18,pp. D-1~ D-11.

  74. 鄒國益、張高華、施經緯,2013,"應用有限元素模擬鍛流線對於螺栓抗拉強度之影響",第一屆台灣塑性加工研討會,November 29,pp. 103~ 108.

  75. 鄒國益、張高華、施經緯,2014,"應用FEM和田口法對於擠製模具的應力分析及改善",臺灣扣件產業技術發展協會,February 28,pp. 38~ 46.

  76. 鄒國益、黃永茂、鄧翔宇,2014,"以旋轉模具抽製線材之有限元素模擬", 2014 Conference on Precision Machinery and Manufacturing Technology-PMMT 2014, May 23-25, E014-1~E014-7.

  77. 鄒國益、黃士咸、許桂樹,2014,"骨板扣件多道次熱間鍛造成形有限元素模擬與實驗驗證", 2014 Conference on Precision Machinery and Manufacturing Technology-PMMT 2014, May 23-25, E013-1~E013-11.

  78. 丁立華、翁森棋、郭柏立、鄒國益,2014,"結合橢圓函數與上界限法預測金屬圓柱壓縮成形鼓起變形", 2014 Conference on Precision Machinery and Manufacturing Technology-PMMT 2014, May 23-25, D013-1~D013-7.

  79. 鄒國益、翁森棋、郭柏立、丁立華,2014,"利用上界限函數法與有限元素模擬探討金屬圓柱旋轉鍛造成形特性", 2014 Conference on Precision Machinery and Manufacturing Technology-PMMT 2014, May 23-25, D014-1~D014-6.

  80. 鄒國益、凌岳銘、夏紹毅,2015,"定剪摩擦下,以模具旋轉抽製線材之有限元素模擬最佳化", 2015 Conference on Precision Machinery and Manufacturing Technology-PMMT 2015, May 22-24, E007-1~E007-6.

 

研究計劃案

@國科會及學校一般型研究計畫 (總金額:9,261,700) 104.8核准 1,061,000

  1. 在混合摩擦下,非對稱軋延之理論與研究NSC-83-0117-C-132-007-E 國科會 100,000 主持人 82/08/01-83/07/31

  2. 板材非對稱冷間軋延之最小板厚分析NSC-87-2212-E-132-001 國科會 148,400 主持人 86/08/01-87/07/31

  3. 複合板材非對稱冷熱間結合軋延之分析NSC-88-2212-E-132-002 國科會 150,500 主持人 87/08/01-88/07/31

  4. 在定剪摩擦下,未結合之三明治板材冷熱間結合軋延理論分析NSC-89-2212-E-132-009 國科會 262,800 主持人 89/08/01-90/07/31

  5. 在庫倫摩擦下,未結合之雙層複合板材非對稱軋延之分析 YTIT-89-RD-E-003 永達技術學院 50,000 主持人 89/08/01-90/07/31

  6. 圓盤旋轉壓縮成形理論分析NSC-90-2212-E-132-005 國科會 177,600 主持人 90/08/01-91/07/31

  7. 在定剪摩擦下,已結合之三層複合板材冷熱間非對稱軋延理論分析YTIT-90-RD-001 永達技術學院 50,000 主持人 90/08/01-91/07/31

  8. 未結合之三層複合板材冷熱間非對稱結合軋延之研究NSC-91-40216F 國科會 600,000 主持人 90/08/01-91/07/31

  9. 在圓環旋轉壓縮成形下,摩擦校正曲線建立及理論分析與實驗驗正(I) NSC-91-2212-E-132-001 國科會 2 84,100 主持人 91/08/01-92/07/31

  10. 在圓環旋轉壓縮成形下,摩擦校正曲線建立及理論分析與實驗驗正(II) NSC-92-2212-E-132-003 國科會 544,400 主持人 92/08/01-93/07/31

  11. 已結合複合圓柱層材旋轉壓縮成形之理論分析與實驗驗證(I) NSC-93-2212-E-132-004 國科會 495,900 主持人 93/08/01-94/07/31

  12. 已結合複合圓柱層材旋轉壓縮成形之理論分析與實驗驗證(II) NSC-94-2212-E-132-003 國科會 703,000 主持人 94/08/01-95/07/31

  13. 等通道與變通道彎曲擠製之變形機制與實驗模具設計NSC-95-2212-E-018-002 國科會 426,000 共同主持人 95/08/01-96/07/31

  14. 多孔性圓柱材旋轉壓縮成形之研究(三年期) NSC-95-2212-E-244-027-MY3 國科會 1,741,000 主持人 95/08/01-98/07/31

  15. 多孔性圓環旋轉壓縮成形之研究NSC-98-2221-E-244-007 國科會 502,000 主持人 98/08/01-97/07/31

  16. 逆向旋轉擠製成形之研究NSC-99-2221-E-244-005 國科會 508,000 主持人 99/08/01-100/07/31

  17. 複合板材旋轉沖孔成形之研究NSC-100-2221-E-244-009 國科會 505,000 主持人 100/08/01-101/07/31

  18. 壓力容器旋鍛成形之研究(二年期) NSC-101-2221-E-244-004-MY2 國科會 1,321,000 主持人 101/08/01-103/07/31

  19. 以旋轉模具抽製線材之研究MOST-103-2221-E-244 -003 - 科技部 692,000 主持人 103/08/01-105/01/31

  20. 以旋轉模具抽製線材之研究(II) MOST-104-2221-E-244 -013 科技部 1,061,000 主持人 104/08/01-105/07

 

@產學合作計畫 (總金額:25,092,214)

  1. 歐盟AB類中文化之研究 財團法人精密研究發展中心 840,000 主持人 88/08/01-89/07/31

  2. 旋轉壓縮成形機之設計與研發NSC-91-2622-E-132-003-CC3 國科會商寶機械 599,200 主持人 91/06/01-92/05/31

  3. 壓力容器複合端板旋壓成形之研究NSC-92-2622-E-132-002-CC3 國科會隆成發 510,500 主持人 92/06/01-93/05/31

  4. 壓力容器複合端板旋壓成形之實驗驗證NSC-93-2622-E-132-002-CC3 國科會隆成發 715,300 主持人 93/05/01-94/04/30

  5. 以直接引伸成形雙層複合端板壓力容器之研究NSC-94-2622-E-132-005-CC3 國科會剛健鋼鐵 591,000 主持人 94/11/01-95/10/31

  6. 壓力容器之雙層複合端板引伸成形實驗設計與驗證NSC-96-2622-E-244-004-CC3 國科會剛健鋼鐵 698,000 主持人 96/05/01-97/04/30

  7. 切削旋入螺絲成形有限元素模擬 合豐工廠 180,000 主持人 98/04/01-99/03/31

  8. 教育部推動技專校院與產業園區產學合作整合型計畫-三層複合圓柱層材旋轉鍛造成形技術研發 教育部家煌企業 2,475,000 主持人 97/01/01-98/12/31

  9. 扣件製程動態模擬與模具分析技術 唐邑精密 240,000 主持人 100/03/01-102/09/30

  10. 合金A286太空扣件開發計畫 (E10300018001-126) 朝揚科技 140,000 主持人 103/05/08-103/11/30

  11. 超合金A286太空扣件開發計畫, 朝揚科技股份有限公司(E10300018001-126), CITD委託研究 經濟部朝揚科技 140,000 主持人 103/06/01-103/11/30

  12. 雲端扣件金相組織檢測服務系統之開發與推廣,經濟部商業司SIIR創新營運計畫(:E-B-SIIR-276) 委託研究 經濟部第一科技技術公司 398,000 主持人 103/06/01-103/11/30

  13. 焊接閥門擋塊成形分析與模具設計製造(MOST-103-2622-E-244-002-CC3) 科技部朝揚科技 1,065,214 主持人 103/06/01-104/11/31

 

@在地型學界科專計畫(總金額:16,500,000)

  1. 精微銅軸扣件關鍵技術研發三年期計畫-第一年98-EC-17-A-05-S1-122 經濟部 5,500,000 主持人 98/04/01-99/03/31

  2. 精微銅軸扣件關鍵技術研發三年期計畫-第二年99-EC-17-A-05-S1-122 經濟部 5,500,000 主持人 99/04/01-100/03/31

  3. 精微銅軸扣件關鍵技術研發三年期計畫-第三年100-EC-17-A-05-S1-122 經濟部 5,500,000 主持人 100/04/01-101/09/30

 

@國科會大專生專題研究計畫(總金額:203,000)

  1. 在板材非對稱軋延時,摩擦因子與摩擦係數轉換關係之研究NSC-86-2815-C-132-001-E 國科會 39,000 主持人 86/07/01-87/02/28

  2. 複合板材冷間非對稱 PV 軋延之分析NSC-87-2815-C-132-001-E 國科會 39,000 主持人 87/07/01-88/02/28

  3. 複合板材冷熱間非對稱軋延極限情況之分析NSC-89-2815-C-132-003-E 國科會 39,000 主持人 89/07/01-90/02/28

  4. 未結合雙層板材冷熱間 PV 捲繞結合軋延之分析NSC-90-2815-C-132-003-E 國科會 39,000 主持人 90/07/01-91/02/28

  5. 扣件製程動態模擬NSC-98-2815-C-244-009-S 國科會 47,000 主持人 98/07/01-99/02/28

 

@國際合作與交流計畫 (總金額:4,710,000)

  1. 東南亞地區汽車產業技術交流與推廣 教育部技職司 1,145,000 主持人 91/03/01-91/12/31

  2. 提昇大學國際競爭力 教育部高教司 1,420,000 主持人 91/08/01-91/12/31

  3. 教育部技專校院國際合作與交流計劃—整合型計劃:先進材料成型技術國際交流與產學合作 教育部技職司 2,145,000 主持人 95/03/01-95/12/16

 

@專案計畫(總金額:55,551,656)

  1. 技專校院促進技職教育多元化與精緻化暨發揮社區學院功能 教育部技職司 12,120,000 主持人 88/08/01-89/07/31

  2. 大學及技專校院就業學程—精密模具學程 行政院勞委會職業訓練局 592,000 主持人 92/08/01-93/09/30

  3. 大學及技專校院就業學程—先進車輛設計製造學程 行政院勞委會職業訓練局 672,000 主持人 93/08/01-94/09/30

  4. 教育部顧問室九十四年度精密機電整合人才培育計畫—整合型計畫:微奈米發電系統教育培育計畫 教育部科技顧問室 8,000,000 主持人 94/01/01-94/12/31

  5. 教育部提升技專校院學生外語能力專案計劃--語言中心之建置 教育部技職司 1,500,000 主持人 94/08/01-95/07/31

  6. 教育部教師實務進修專案計劃 教育部技職司 1,350,000 主持人 94/07/01-94/12/31

  7. 大學校院推動奈米科技前瞻人才培育計畫 教育部科技顧問室 252,000 主持人 95/03/01-95/12/31

  8. 微奈米發電系統教育培育中程綱要計畫—子計畫: 薄膜電池應用技術教育 教育部科技顧問室 500,000 主持人 95/01/01-95/12/31

  9. 教育部顧問室九十五年度精密機電整合人才培育計畫—整合型計畫:微奈米發電系統教育培育計畫 教育部科技顧問室 5,500,000 主持人 95/01/01-95/12/31

  10. 教育部輔導大學校院推動創意學院計劃--- 打造科技領域創意學院 教育部技職司 1,800,000 主持人 95/08/01-96/07/31

  11. 奈米科技前瞻人才培育計畫 教育部科技顧問室 385,000 主持人 96/08/01-97/07/31

  12. 奈米科技前瞻人才培育計畫 教育部科技顧問室 220,000 主持人 97/08/01-98/07/31

  13. 96年度南區區域教學資源中心計畫-扣件技術整合學程及推廣教育活動 教育部技職司 1,375,000 主持人 97/08/01-98/07/31

  14. 教育部補助技職校院建立策略聯盟計畫-整合區域技專校院與高職(綜高)之產學實務多元人才培育計畫—精密扣件產業技術人才在地紮根培育計畫-第一年 教育部 1,430,000 主持人 98/08/01-99/07/31

  15. 技職校院獎勵大學卓越---南區區域教學資源中心主軸計劃七 「提昇教學品質改善計畫: 產學實務教學精進計畫」 教育部 10,428,956 主持人 99/01/01-100/06/30

  16. 扣件產業研發碩士專班計畫 經濟部與教育部 6,500,000 主持人 98/02/01-101/01/31

  17. 教育部補助技職校院建立策略聯盟計畫-整合區域技專校院與高職(綜高)之產學實務多元人才培育計畫—精密扣件產業技術人才在地紮根培育計畫-第二年 教育部 690,000 主持人 99/08/01-100/07/31

  18. 教育部補助技職校院建立策略聯盟計畫-整合區域技專校院與高職(綜高)之產學實務多元人才培育計畫—精密扣件產業技術人才在地紮根培育計畫-第三年 教育部 730,000 主持人 100/08/01-101/07/31

  19. 100年教育部技職司全國教務長會議 教育部技職司 901,700 主持人 100/09/01-100/11/31

  20. 教育部產業先進設備人才培育計畫-數位化模具產業先進設備人才培育資源中心 教育部顧問司 605,000 主持人 101/01/01-101/12/31

 

專書
  1. 鄒國益、郭柏立,1996,"專題製作與論文寫作",全華科技圖書公司。

  2. 張震中、許佩佩、鄒國益,1997,"材料力學",全華科技圖書公司。

  3. 鄒國益、薛堯文,2003,"動力學",全華科技圖書公司。

專利

@Patents

  1. 朱曉明、夏紹毅、鄒國益、鄭貴鴻,2006,"引擎凸輪軸座之油槽構造",中華民國新型專利, 新型第M293968。

  2. 朱曉明、鄒國益、夏紹毅,2006, "引擎排氣管之可變氣道構造",中華民國新型專利,新型第M295198。

  3. 白育綸、王盛世、鄒國益,2010, "通電式微生物收集裝置",中華民國新型專利,新型第M374056。

  4. 夏紹毅、鄒國益、楊俊傑,2012, "鎖固元件之夾具",中華民國新型專利,新型第M446842。

 

@Technology Transfer

  1. 旋轉壓縮成形機之設計與研發,國科會先期技轉。

  2. 壓力容器複合端板旋壓成形之研究,國科會先期技轉。

  3. 壓力容器複合端板旋壓成形之實驗驗證,國科會先期技轉。

  4. 以直接引伸成形雙層複合端板壓力容器之研究,國科會先期技轉。

  5. 壓力容器之雙層複合端板引伸成形實驗設計與驗證,國科會先期技轉。

  6. 切削旋入螺絲成形有限元素模擬,合豐工廠有限公司先期技轉。

  7. 扣件製程動態模擬與模具分析技術,唐邑精密工業股份有限公司先期技轉。

  8. 焊接閥門擋塊成形分析與模具設計製造,科技部先期技轉

 

專業服務
  1. 屏東市和平國小家長會委員、常務委員、家長會會長

  2. 屏東縣警察之友會常務理事、全國會員代表

  3. 屏東市陸興國中家長會委員

  4. 高雄科學技術學院校友總會理事

  5. 高雄科學技術學院機械系友會副會長

  6. 高雄應用科技大學機械系友會會長

  7. 臺灣科技大學南區校友會理事、臺灣科技大學機械系友會理事、臺灣科技大學校友會永久會員

  8. 中華民國第一屆中山大學校友會監事、中山大學校友會永久會員、中山大學第一屆機電系友會理事長、中山大學機電系友會榮譽理事長、屏東縣第二屆中山大學校友會理事長、屏東縣中山大學校友會榮譽理事長

  9. 中國工程師學會高雄分會監事、全國會員代表、中國工程師學會永久會員

  10. 中華民國技職教育暨產業發展協會常務監事及理事

  11. 中國機械工程學會永久會員

  12. 中華民國鍛造協會資深會員

  13. 日本塑性加工學會資深會員

  14. 中華民國力學學會資深會員

  15. 臺灣扣件產業技術發展協會第一屆理事長(創會理事長)及現任第二屆理事長

  16. 臺灣塑性加工學會第一屆理事

  17. 第一屆屏東和平扶輪社公共形象委員會主委

獲獎與榮譽
 

授獎單位

內容

        

國科會

國科會甲種研究獎勵

2000.8

 永達技術學院

永達技術學院學報正式創刊主編

2000.4

Tokyo University, Japan

Session chairman and reviewer, the 7th International Conference on Steel Rolling, Makuhari, Chiba, Japan

9-11 November, 1998

Maryland University, USA

 Session chairman, the 8th International Symposium on Plasticity and its Current Applications, Whistler, Canada

17-21 July, 2000

Maryland University, USA

Organizer, Session chairman and reviewer, the 9th International Symposium on Plasticity and its Current Applications, Aruba, USA

3-9 January, 2002

Birmingham University

Session chairman, the 9th International Conference on Metal Forming, Birmingham, UK

3-7 September, 2002

Maryland University, USA

 Session chairman and reviewer, the 10th International Symposium on Plasticity and its Current Applications, Quebec, Canada

7-11 July, 2003

 

Session chairman and reviewer, the 6th Asia Pacific Conference on Materials Processing

22~25 September, 2003

 

Reviewer, Journal of Materials Processing Technology, International Journal of Mechanical Sciences, International Journal of Manufacture Tools, etc

Since 1999

Krakow Technology University

Session chairman in keynote lecture, the 10th International Conference Metal Forming 2004, Krakow, Poland

19-22 September, 2004

永達技術學院

永達技術學院第一屆專題製作競賽優等獎

90.6

永達技術學院

永達技術學院第三屆專題製作競賽特優獎

92.6

永達技術學院

 永達技術學院第一屆學術研究優良獎

92.5

澳洲Wollongong大學

受邀澳洲Wollongong大學機械工程系擔任Principal Research Fellow

90.8~91.7

國科會

國科會第四十屆科學與技術人員國外短期研究半年

91.1~91.7

國科會

國科會工程處機械固力學門專題計畫審查者

92年度迄今

中國工程師學會

當選第三屆及第五屆中國工程師學會全國區會員代表

88.7~90.5 and 92.7~94.5

中國工程師學會

當選中國工程師學會高雄分會第二十屆監事

90.6~92.7

中山大學

副總幹事,九十二年度年會暨第三屆精密機製造研討會---SME國際製造工程學會中華民國分會

92.11.15

中國工程師學會

92年度中工、中電、中機聯合年會籌備委員

92.4.9

成功大學

27屆中華民國力學會議籌備委員

92.12.13

成功大學

微奈米科技研究中心執行委員

92.8~97.7

成功大學

南區奈米人才培育中心執行委員

92.8~97.7

紐西蘭Waikato大學

受邀至紐西蘭Waikato大學材料與製程工程系擔任訪問教授

93.1~93.7

永達技術學院

主任委員,2003~2007年精密機械與製造技術研討會

每年5月中旬後舉辦

高苑科技大學

主任委員,2008~2010年精密機械與製造科技研討會

每年5月中旬後舉辦

台灣扣件產業技術發展協會

主任委員,2011~2015年精密機械與製造科技研討會

每年5月中旬後舉辦

臺灣科技大學

臺灣科技大學傑出系友

95學年度

高雄應用科技大學

高雄應用科技大學傑出校友

96學年度

 

Middle-East University

Members of International Program Committee, Organizer and Session chairman, the 12th International Conference on Machine Design and Production,  Turkey

5-8 September 2006

Birmingham University

Organizer, Session chairman and Reviewer, the 11th International Conference Metal Forming 2006, Birmingham, UK

11-13 September, 2006

Middle-East University

Members of International Program Committee, Organizer and Session chairman, the 13th International Conference on Machine Design and Production, Istanbul, Turkey

September 3-5, 2008.

Krakow Technology University

Members of International Program Committee, Organizer and Session chairman, the 12th International Conference Metal Forming 2008, Krakow, Poland

21-24 September, 2008

Toyohashi University of Technology, Japan

Members of International Program Committee, Organizer and Session chairman, the 13th International Conference Metal Forming 2010, Toyohashi, Japan

19-22 September, 2010

Middle-East University

Members of International Program Committee, Organizer and Session chairman, the 14th International Conference on Machine Design and Production, Güzelyurt, Northern Cyprus, Turkey

29 June - 2 July, 2010.

高苑科技大學

高苑科技大學第一屆產學合作績優教師(全校只選出產學合作金額最高2)

20 November, 2010

 

精密機械與製造科技期刊創刊主編

March, 2011

國科會

優秀人才彈性薪資(24/,全校唯一)

100.8~101.7

國科會

優秀人才彈性薪資

(12/,全校兩位,排名第一)

101.8~102.7

1.National Formosa University, Taiwan 2.Fuzhou University, P.R. China

3.Taiwan Association of Engineering and Technology Innovation 4.Chienkuo Technology University, Taiwan

Members of International Program Committee, Organizer and Session chairman, The 1st International Conference on Engineering and Technology Innovation 2011, Kenting, Pingtung, Taiwan

11-15

November, 2011

1.Inner Mongolia University of Technology
2.Korea Maritime University
3.Queensland University of Technology
4.Hong Kong Industrial Technology Research Centre

Session Chair, The 2nd/2012 International Conference on Materials and Products Manufacturing Technology, Guangzhou, China (MPMT 2012)

22-23

September, 2012

1.National Formosa University, Taiwan 2.Fuzhou University, P.R. China

2.Taiwan Association of Engineering and Technology Innovation

Members of International Program Committee and Session chairman, The 2nd International Conference on Engineering and Technology Innovation 2012, Kaohsiung, Taiwan

02-06

November, 2012

Taiwan University of Technology and Science

Members of International Program Committee and Session chairman, 2013 International Conference on Advances in Materials and Processing Technologies, Taipei, Taiwan

22-29

September, 2013

National Chung Hsiung University

Members of International Program Committee, 2013 International Conference on Applied Science and Precision Engineering, Nantou, Taiwan

18-22

October, 2013

Advances in Mechanical Engineering

Guest Editor for Advances in Precision Machinery and Manufacturing Technology

September 2013~2014

Deakin University & Swinburne University of Technology, Australia

Member of International Organization Committee of the 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes

6-10 January, 2014

National Sun Yat-sen University
Kaohsiung,Taiwan

Member of International Scientific Committee of AEPA2014, 12th Asia-Pacific Conference on Engineering Plasticity and Its Application

6-10

September, 2014

1.National Formosa University, Taiwan 2.Taiwan Association of Engineering and Technology Innovation

Members of International Program Committee and Session chairman, The 3rd International Conference on Engineering and Technology Innovation 2014, Pingtung, Taiwan

31 October-4 November, 2014

Materials

Guest Editor

November 2014~2015

科技部

優秀人才彈性薪資

(12/,全校三位,排名第二)

103.8~104.7

Key Engineering Materials

Guest Editor

May 2015~2016

1,Taiwan Fasteners Industry Technology Development Association

2.Fortune Institute of Technology

Chair-in-Chief, The 1st Conference on Precision Machinery and Manufacturing Technology

22-24 May, 2015

 

其它

@ Reviewer

  1. Journal of Materials Processing Technology

  2. International Journal of Mechanical Sciences

  3. International Journal of Engineering Simulation

  4. Proc. Instn. Mech. Engrs., Part B: J. Engineering Manufacture

  5. International Journal of Machine Tools and Manufacture

  6. ISIJ International.

  7. International Journal of Control and Vibration

  8. Mathematical Problem in Engineering

@ Editor of Journals

  1. Editor-in-Chief, Journal of Precision Machinery and Manufacturing Technology

  2. Guest Editor, Materials

  3. Guest Editor, Key Engineering Materials.

  4. Editor-in-Chief, International Journal of Precision Machinery and Manufacturing Technology

etc.